Vibration-control products backed by practical manufacturing
Vibration Isolation Group brings together Hidamp Industrial Mountings Pvt Ltd, Louisons Engineering Works and JB Associates (Innoliev) to support industrial customers with vibration isolators, rubber-to-metal bonded parts, metal subassemblies and application-led product development.
One group, complementary manufacturing strengths
The group structure connects product engineering, repeat manufacturing, fabrication, machining, bonded-rubber processing and customer-focused supply. The exact manufacturing route is selected for the part, volume and inspection requirement.
Industrial mountings
Vibration isolators, dampers, buffers, pads and rubber-to-metal bonded products for machinery, OEM and maintenance applications.
Engineering works
Metal preparation, machining, fabrication, rubber processing, moulding support and recurring industrial production.
Application supply
JB Associates’ product identity for selected engineered isolation products, including the SH25 spring-hanger family.
From application data to a manufacturable solution
Selection begins with the machine and operating condition, then works back to load, movement, fixing, material, geometry, process and supply method.
- Review static load and number of support points
- Identify vibration source and operating speed where known
- Check mounting space, fixing and directional constraints
- Review temperature, oil, weather and chemical exposure
- Select a catalogue family or define a controlled custom route
- Confirm inspection, traceability, packing and repeat-supply needs
Manufacturing and process capability
Capabilities are coordinated across the group and qualified external job-work partners where appropriate. Availability and route are confirmed against each enquiry.
Compound preparation & moulding
Mixing, pre-form preparation, compression moulding, deflashing and controlled handling for vibration-control components.
Rubber-to-metal bonding
Metal cleaning and preparation, bonding-agent application, controlled drying, moulding and post-process inspection.
Machining & fabrication
Turning, drilling, punching, pressing, cutting, bending, welding and fabricated subassemblies for inserts and mounting hardware.
Surface preparation
Cleaning, grinding, painting and externally coordinated plating or specialist processes when specified.
Kitting & line-ready supply
Matched components, labelled kits and sequenced packs can be discussed for OEM or maintenance teams that need simpler line-side handling.
Samples & repeat production
Support for sample review, first-piece approval, controlled revisions and conversion into repeatable product and inspection records.
Elastomer selection: engineering guidance
The table is a practical starting point, not a substitute for application review. Compound formulation, hardness and finished-part geometry materially affect performance.
| Elastomer family | Common strengths | Points to confirm | Typical discussion areas |
|---|---|---|---|
| Natural rubber (NR) | Resilience, fatigue resistance and dynamic behaviour | Oil, ozone, weather and temperature exposure | General vibration isolation and resilient elements |
| Nitrile rubber (NBR) | Oil and fuel resistance | Outdoor weathering and low-temperature requirement | Oil-exposed machinery and sealing-adjacent applications |
| EPDM | Weather, ozone, water and outdoor durability | Hydrocarbon oil or fuel contact | Outdoor equipment and environmental exposure |
| Neoprene / CR | Balanced weathering, flame behaviour and moderate oil resistance | Exact media, temperature and compliance needs | General industrial and outdoor mountings |
| SBR and blended compounds | Cost-effective general mechanical performance | Dynamic duty, ageing environment and fluid contact | Application-specific pads, buffers and moulded parts |
| Viton / FKM | Demanding oil, heat and chemical environments with the correct formulation | Compound-specific compatibility, dynamic duty and cost | Specialised applications after technical review |
| Silicone rubber | Specialised temperature and environmental capability | Tear, abrasion, dynamic behaviour and exact duty | Special-purpose products after geometry and compound review |
Selection note: Final suitability must be checked using actual load, movement, temperature, environment, service life and applicable customer specifications. Published guidance does not create a universal performance guarantee.
Indicative formulation and development capability
Development work can target different tensile/elongation balances, including approximately 22–27 MPa with elongation up to about 800%; 14–18 MPa with elongation up to about 1300%; about 8 MPa with elongation up to about 2000%; and about 27 MPa with elongation around 600–700%. These combinations illustrate high-tensile/high-elongation, high-elongation, lower-tensile/very-high-elongation and high-tensile/lower-elongation formulation capability.
Not a universal product specification: actual values depend on polymer, formulation, hardness, curing, geometry, test method, ageing, application and customer specification. Values must not be applied to every finished mounting.
Inspection and traceability
Inspection depth is matched to the product and customer requirement. The group is structuring ERP-linked quality records so product, process and inspection information can remain connected.
Incoming and in-process
Material identity, dimensions, metal preparation, first-piece checks and in-process visual controls where applicable.
Finished product
Dimensions, hardware configuration, visual condition, hardness and load/deflection or other functional checks when specified.
Testing support
Digital load-testing equipment and production inspection tools support internal checks. Test method, capacity and acceptance criteria are confirmed before use.
Carry the product reference with you
The Vibration Isolation Group Android app provides product and company information and can use compatible smartphone motion sensors for vibration measurement and analysis. Phone-sensor results are useful for preliminary observation; calibrated instruments and application review may still be required. Catalogue data and final selection should be confirmed for the exact application.
Get it on Google Play
Responsible improvement
The group’s operating approach is to reduce avoidable scrap, recover usable offcuts where practical, improve energy visibility at workstation level and evaluate solar or other efficiency measures using verified site data. Specific savings or renewable-energy claims will only be published when supported by measured records.
Coimbatore manufacturing and support location
The group operates from Coimbatore, Tamil Nadu, with company-specific manufacturing, commercial and support activities. An approved location-map image will be added here after verification.
Awaiting the approved VIG/Hidamp location-map asset. No coordinates or map imagery have been invented.
Share the application, drawing or current component
We can help identify the information needed for a catalogue selection, replacement review or controlled new development.